 |
The triton series 2000 workcentre is the centrepiece of the triton woodworking system. The multi-function workcentre and the range of accessories enable you to create professional results every time. Converts from a tablesaw to a crosscut saw in less than a minute. Accepts most circular saws (184mm - 235mm / 71/4in - 91/4in) & most routers, jigsaws and planers using optional accessories. Ideal for site work. Self-levelling legs give remarkable stability on uneven ground and fold up for transportation and storage. Self-levelling legs give remarkable stability on uneven ground and fold up for transportation and storage. -Unique 3-sided protractor for accurate mitre and taper cuts. Adjusts from 0° - 45° in both directions and can be used on either side of the blade. -Quick-release saw clamps allow you to remove your saw for hand-held use in 10 seconds, and replace it just as fast. -Full length rip fence with quick action locking levers and precise calibration scales (0 - 620mm/24in). Fence rear face is at 45° and has guides provided for bevels & chamfers. See-through polycarbonate safety guard with kickback protection & dust extraction point. Captive push-stick and side pressure guide included for narrow ripping. Quick lock/release table, work guides and overhead guard for fast conversion between modes. Optional accessories:. Sliding extension table, router table, overhead routing plate, jigsaw kit , biscuit joiner, finger jointer, planer attachment kit , dust collection , bevel ripping guide, height winder kit & retractable wheel kit, faceplate sander. |
